Foundation Repair

Foundation Settlement Repair

Foundation settlement problems are common in many parts of the country, but here in Kansas City, our hot summers and cold winters combined with dry spells and periods of heavy rain make our area especially vulnerable to foundation issues. Foundation settlement problems are common, mainly because homes and building are heavy and some types of soil have poor load-bearing capability. Foundation settlement can happen over time when soil settles or erodes because of rain or a water leaks. Signs of foundation settlement include:

  • Concrete stairs that sink or tilt
  • Leaning or tilting chimneys
  • Vertical cracks in concrete foundation walls
  • Cracked stone veneer or exterior stucco
  • Cracked and sinking slabs
  • Cracks in drywall around window & doors
  • Door & Windows that are hard to open and close

Foundation settlement repair solutions typically include some form of underpinning or piering including:  concrete piers, steel pier foundation repair and helical pier foundation repair.

Bowed Basement Walls

Bowed basement walls are caused by too much ground pressure pushing against your basement walls. When rain water is absorbed by the soil around your basement foundation, the soil expands as it absorbs water and pushes against your exterior basement walls. When the soil dries, it moves away from your foundation walls again. This cycling of expansion and contraction creates bowing and weakens you basement walls. Arrow Foundation provides several solutions for bowed walls:

  • Wall Bracing
  • Tie Backs
  • Concrete Tie Backs
  • Steel Plate Tie Back
  • Helical Torque Tie Back Anchors

Wall Straightening

In some cases when bowed walls represent a more serious problem, Arrow Foundation may recommend wall straightening. In simple terms, basement wall straightening involves pushing or pulling your foundation walls back into place. In order to apply this solution, we need to excavate the soil down to the foundation’s footing. Then we repair and straighten the wall. Since the foundation is exposed its often cost effective to address the issues including: fixing the cracks, applying a basement waterproofing membrane, and installing or repair your drain tile system.

Wall Anchoring

Helical Torque Tie Back Anchors to find out that and Arrow Foundation Repair engineered wall support system can permanently fix their failing basement walls at a fraction of the cost of many other foundation repair methods. Wall anchoring involves using galvanized anchors that are buried out a considerable distance from your foundation walls. These anchors are steel wall plates with anchoring rods. The plates and anchors will hold your basement wall in place, and depending on the system used, can be adjusted to straighten a wall over time.If your house has basement walls that are cracked, leaning or bowing, you likely have a have a serious foundation issue that needs to be resolved. A bowed, cracked or buckling foundation wall often raises great concern for homeowners and the thought of contacting foundation repair companies in Kansas City can be intimidating. Many of or Kansas City homeowner customers are relieved

Foundation Piering

As discussed in other sections, foundation settling is more and more common. Older homes settle over long periods of time and their foundations are often weaker than new homes with advanced foundation and concrete technologies. Newer homes however, are being built on unstable soils – so while the foundation and basement wall may be stronger, the earth which they rest on may not be. In either case, foundation issues are becoming more common. Foundation piering (also known as Underpinning Brisbane) is the process of attaching steel piers to the foundation of your house to keep it from sinking further, or to keep your foundation in place after it has been raised or fixed. In order for the steel foundation piers to be permanently effective, they often need to be installed deep into the earth to reach bedrock or load-bearing strata. Arrow Foundation Repair is Kansas City’s leader for this type of foundation repair.

Crawl Space Repair

Crawl space repair, often referred to as crawl space encapsulation, is a foundation repair industry term used to describe a crawl space that that is equipped with a moisture barrier on the floor and walls of the entire crawl space area.

By recovering and sealing your crawl space, you can keep out insects and critters. More importantly, crawl space encapsulation help to improve air quality, reduce energy costs, and keep moisture out of the area – which in turn reduces the chance for mold, mildew and other problems that sub-surface moisture can create for your home. Encapsulation typically involves cleaning and prepping the area, installing a vapor barrier, and sometimes even installing a humidifier and / or a interior drain tile and a sump pump to collect and remove water away from the
crawl space area.

Foundation Heaving

Heaving refers to the upward movement of a basement foundation or concrete slab. While there are several root causes, the end effect is that underlying soils expand or swell and push the concrete out of place. Heave is more common with slabs than foundations because slabs (like floors, driveways and sidewalks) are lighter and often at surface level. Heave most commonly occurs within the first few years of the building’s construction but can also occur after extended drought conditions. Slab and foundation heave are most commonly caused by:

  • Expansive Soils
  • Tree Roots
  • Frost Heave
  • Plumbing Leaks
  • Long Term Precipitation
  • Poor Drainage

Commercial & Industrial Foundation Repair

Commercial Foundation

Commercial Foundation

Arrow Foundation Repair is a regional leader in commercial foundation piering. We have commercial foundation repair at every level. We have worked with many leading property management and property development companies around the county. Please contact us for more information on our commercial foundation repair capabilities and services.

Basement Waterproofing

Waterproofing is needed anytime a structure is built at ground level or below ground. Waterproofing and drainage considerations are especially needed in cases where ground water is likely to build up in the soil and raise the water table. This higher water table causes hydro static pressure to be exerted underneath basement floors and against basement walls. Hydro static pressure forces water in through cracks in foundation walls, through openings caused by expansion and contraction of the footing-foundation wall joint and up through floor cracks. Hydro static pressure can cause major structural damage to foundation walls and is likely to contribute to mold, decay and other moisture related problems.

THE ULTIMATE IN BASEMENT WATERPROOFING, DECO PRODUCTS!

Home builders and concrete contractors put their trust in Deco waterproofing products. Why not use the safest most economical product for basement waterproofing and keeping crawl spaces dry. Give your customers a peace of mind against water moisture, mold and fungus. We have developed safe waterproofing products that are not only non-hazardous and non-flammable, but are most effective at combating harmful results of moisture in new home construction and existing homes.

We realize that a big part of concrete contractors’ business is by referrals; foundation wall leaks, seepage and condensation is considered bad business. That is why Deco waterproofing products are designed to protect against these forms of moisture problems. Our goal has always been to improve the integrity of the waterproofing and damp proofing industry by listening to our customers. In 1991, we saw the need to develop new waterproofing products which would eliminate solvents and oil based materials being applied below the grade line on basement foundation walls.

Our intention has always been to better worker safety issues, and develop waterproofing products that are extremely effective, non-hazardous and non-flammable when being applied.

Image result for basement waterproofing
  Waterproofing – As a waterproofing manufacturer, we realize there are many waterproofing products to choose from on the market. At Deco Products we are constantly re-evaluating our waterproofing products, staying on top of the safest and most superior technology. We have been in the construction industry for over 30 years and realize the need for a waterproofing product you can trust, one that has been successfully applied on over 500,000 concrete and masonry units, Deco Waterproofing Products!

  Basement Mold Prevention – DECO Mold Prohibitor is a water based penetrating sealer that is used for the prevention of mold growth on masonry block, pre-cast and interior poured concrete structures. Ensure your customer a mold free basement. Prevent mold, mildew and bacteria before it happens by using a product you can trust.

  Foundation Repair – In many areas, waterproofing contractors still recommend repairing basement leaks using the existing drain tile methods they learned for concrete block repair. This method of foundation repair still exists in spite of the fact that most poured concrete foundation cracks can be effectively repaired by the time-proven, more economical, epoxy or urethane foam low pressure crack injection method.

“Eliminate Potential Basement Flooding Nightmares”

It’s Bound to Happen

Hot water heater tanks can “let go” ever 5 – 10 years and when this happens, the water damage can be devastating. Click Here

The entire basement gets flooded, ruining all your contents and possessions. Basement Technologies continually strives to eliminate potential water problems in the basement. In doing so, Basement Technologies has developed the Tank Pro, a hot water tank protector that will stop this damage from occurring by routing the escaping water from the tank and channeling it to your perimeter Water Trek Aqua Route system and Water Grabber Bull Dog.

The exclusive design of our patented product allows it to be installed around hot water tanks, washing machines, well water tanks or any other water holding device in the basement. So if a disaster happens with a hot water tank, the water will be contained and brought to your sub floor system on the perimeter wall and not flood your basement.

Any device which holds water is able to “let go”. When this happens, the Tank Prois able to contain the water and drain it into your Water Trek Aqua Route system. This can save you potentially thousands of dollars in water damage repairs.Washing machines, hot water tanks, water purifiers, etc. can all be protected.tankpro3.jpgProtect your basement from un expected hot water tank breaks. A hot water tank rupture can devastate a basement. You’ve already protected yourself with the best basement waterproofing system on the plane, shouldn’t you also protect your basement from unexpected plumbing breaks?Exclusive Sub-Floor Tank Protection. The Tank Pro is an exclusive patented design unique to the basement waterproofing industry. Previous tank protectors were designed using only a 2-part epoxy or pan mounted to the floor.

Basement Technologies developed the tank protector which becomes part of the floor, submerged in the concrete slab, creating a bond to the floor which far surpasses anyone else’s.

The hose or basin on a washing machine or any water holding tank can let go as well as ruptured hot water tank. Basement Technologies can protect you basement from flooding by taking the escaping hot water tank’s water and disposing of it under the floor into your patented Water Trek Aqua Route system and containing it with the patented Tank Pro.Our Tank Pro is actually set in the floor guaranteeing a permanent seal which will prevent unwanted water damage to your basement.